Vapecige VTbox200 200w box mod

The Vapecige VTbox200 200w box mod uses the original Evolv chips which is a guarantee for the quality.Other great features the Vapecige VTbox200 has includes a spring loaded atomizer connection pin, large battery venting slots, and more.

It features Evolvs patented Wattage control, Temperature Protection, Preheat, OLED screen, and waterproof onboard buttons. The DNA 200 runs from 3 cell lithium polymer battery, and features cell-by-cell battery monitoring and integrated 1A balance charger. It is the most advanced personal vaporizer controller ever made.

Main Info：

• 510 threading connection;
• Variable wattage: 1W to 200W; 
• Chip: Authentic DNA 200;
• Temperature control in Ni200 / Ti
• Brass spring loaded pin
• Atty lock function
• OLED screen, .91” by Evolv
• VTbox200 designed by a professional designer
• No glue inside
• Full charged only need 3 hours when input current is 1A
• C-frame design, with ultra-light aluminium cover
• Detachable magnets back cover, convenient to replace battery;
• Battery: Replaceable lithium battery, 1800mAh 11.1V-35c-60.5A-3s, with tinned copper wire plated copper wire and 14 mm wire size, conductor resistance 15.6 ohm/km, support max. 55.6A;

DIY Nebula Box Mod with 3D Technology

Cannot find what you want or want some special for with your Mod for vaping? If you have the same ideas, you can DIY your own brand Mod like him with 3D technology. When the nebula released, I do not want to spend money on it, so I decided to build one with the 3D technology. First, Get the drawings prepared

Then, Print and Polish the box

At last, assemble it together.

The original Link: http://www.vpbus.com/news/40934.html

Visit: SXK Nebula Box Mod to Get one Nebula clone

Why Do Vapors Choose Mechanical Mod?

More and More E-cig are produce in the market. The Mechanical Mod is one of the popular mod with its own special features, I think personally with following reasons:


1,  High power with thick cloud

There are circuit board in the Mechanical Mod, and it is used the Mechanics rules for supplying  current. And most Mechanical Mod can adjust the voltage, and has a higher  wattage than other.

2, Cost is cheaper than other vapor gears

As the parts of the Mechanical Mod is dependant. When something goes wrong with the Mod, users only have to replace the broken part, which reduced the cost.

3, Easy for DIY

Users do not have to order a kit. They can get it alone, and put them together for a unique one. It is also a very interesting part for vapor to DIY their own gears.

The Quick Review on IPV D2

Just Read a first impression IPV D2 review about in Chinese, Got the main info translated below: (Original article: http://www.vpbus.com/news/40944.html)

The IPV D2 is a very practical mod with a output wattage 75W. In Temperature Control Mode, the battery consuming is fast, you had better have a battery backup for vaping.

In temperature control mode, the Ohm will consistently increase, for example, if your original ohm is 0.12, then you click fire button long time, it will go up to 0.15, 0.18……. It is because the IPV D2 shows the current ohm instead of original ohm. It is normal.

The  Pro:

It is small in size, easy-carrying and with the silicone case, it has great touch feeling;

The silicone case plays a good role on protecting the coats and the bottom of IPV d2;

 The IPV D2 support direct charging with the default equipment;

The Con:
When the atomizer is too tight, it would leave scratches on the top;

The battery lift is not long enough comparing with other Mods;

If you do not use the silicone case, it is very easy causing paint loss from the body;

How to Clean Coils

How to Clean Your Coils

RDA Coils Builds is a very important parts when vaping. Sometimes, when we build a coil, we could use it for a long time. And after a long time use, the Glycerol in the juice will be carbonized and stuck on the wire making it very dirty.

Of course, we can throw it away and build another one or clear it up. Here I share a very easy way to clear the coil.

First, get a cup of water prepared for cleaning your coil wire. 

Then, Heat your coil till it turning red and last about for 10s, then turn off it and put the coil into the water for a few seconds. You will find the coil become clear and

Third, repeat the process again, the coil will be definitely become clear enough. 

It is a very simple way to clean your RDA coils. You can have a try.